How to Repair Eavestroughs
The word eavestrough can be used interchangeably with gutters. They drop down from the roof edge. Water from the roof is collected by the eavestroughs and directed into a drainage pipe. To ensure that water does not drip down your walls, you need to install eavestroughs. Eavestroughs ensure that your home does not become muggy and dank. Eavestroughs help prevent soil erosion caused by rain and also ensure that water does not tamper with the foundation of the house.
You will need to carry out frequent maintenance practices to ensure that your eavestrough system serves you for a long period. To ensure the optimum functionality of eavestroughs, you need to check them after some time.Here are some of the ways you can repair your eavestrough.
Rusting is what causes most leakages in eavestroughs. Clogs are caused when rainwater stagnates in a section of an eavestrough. A sharp object will pierce through an area of the eavestrough that is already compromised hence creating a hole in it.In case of rain, the homeowner will notice water leaking from the eavestrough. The material that is needed to patch a hole on an eavestrough are easily available, hence making the whole process easy. Remove all debris from the gutter.Then you will need to scrub the area until it is clean using a wire brush. Cut out the rusty area.Use a metal patch that matches the material used to make your eavestrough to repair it. Put some roofing cement on the repair patch.
Your eavestrough may sag due to a number of factors. It can easily be repaired just by setting.The eavestroughs are mostly made from flexible materials such as galvanized steel or aluminum.Due to very heavy rains, your eavestrough may bend or sag.The fasteners that hold the eavestroughs may not hold anymoreWhen fixing a sagging eavestrough you will use a hammer to drive in the fasteners or the spikes back in their right place.The best way to ensure that the fasteners hold is to drive them in solid wood.
When you notice that your eavestrough is overflowing, there is one probable reason, and that is blockage. Leaves and branches cause blockage of the flow of water in an eavestrough, and this causes water to overflow and then it starts to spill over. One of the best ways to combat blockages is the installation of gutter guards. Climb a ladder and remove all the branches and leaves from the eavestrough.
Ensure that you carry out regular inspection on your eavestroughs to ensure that they are functioning well. Rainwater can cause a lot of damage if not drained well.